(CC_a005) Unable to charge - Wall Connector GFCI tripped Disconnect and retry or use different equipment

Find it. Solve it.
Post Reply
thaterrormessage
Site Admin
Posts: 7238
Joined: Tue Jul 14, 2020 3:21 pm

(CC_a005) Unable to charge - Wall Connector GFCI tripped Disconnect and retry or use different equipment

Post by thaterrormessage »

What this alert means:
Ground fault. Current is leaking through an unsafe path.
Possible Line to ground or Neutral to ground fault.

What to do:
Try again by disconnecting the Wall Connector from the vehicle and reconnecting. If the problem persists, turn OFF the circuit breaker servicing the Wall Connector, wait 10 seconds, turn the circuit breaker ON again, then try reconnecting the Wall Connector.
*IS THIS ERROR HAPPENING NOW? Reply in real-time below.* Hold software providers accountable - we rely on the community to acknowledge the same errors and their workarounds/fixes. Register to search and full board access.
Post Reply